Peerless Pressure Washing
and Roof Cleaning
Inc. of Tampa Bay Florida offering safe, non-pressure chemical roof
cleaning. The black and moldy stains on your
roof,
Gloeocapsa Magma, is a type of
algae that thrives in Tampa's humid and warm climates. It usually
appears first
on the North slope of the roof where shade is prevalent and moisture
tends to accumulate. The result is a discolored (black/green) streaked
roof. This problem is not only stealing curb appeal and value from your
home, it is also infecting other surfaces of your property along with
surrounding properties.
This fungus, along with other molds, are feeding on
the organic matter used in the manufacturing of your shingle. If
allowed, the fungus will continue to spread causing premature granule
loss of your shingle. These ceramic granules reflect the heat from the
sun and help keep your home cool. Once this protective barrier is lost,
the heat is allowed to penetrate the shingle causing premature aging
and increasing the energy costs of your home.
Tile roofs can also be infected with the same
fungus and mold. Even worse, the mortar on your tile roof can be
weakened by the fungus. The end result is a cracked and discolored
mortar. The mold will also strip the color and glaze from the tile
leaving a dull, unpolished surface. If allowed, mortar replacement and
color restoration can be extremely costly to the homeowner.
Even more harmful to your roof is allowing high pressure
cleaning with surface cleaners made for concrete year after year.
Peerless Pressure Washing and Roof Cleaning of Tampa Bay, services both
kill and retard these
fungi while protecting the quality of your roof. Our non pressure
chemical roof cleaning system can last
as long as 5 years!
Peerless Pressure Washing and Roof Cleaning, located in
Valrico FL. offers a mold, mildew and
biostat preventative with its cleaning product known as “Peerless
Punch.” Our cleaning agents are applied at the same pressure as your
home shower but at a greater volume (gpm). This application is the
safest for all roof surfaces and requires minimal walking on the roof.
The Asphalt Roofing Manufacturers of America states in its
tech
bulletin , “Caution! High pressure washing systems for algae
removal should not be used.” As a Brandon area homeowner, it is
imperative you heed
this caution in order to protect the integrity of your investment.
|
“Peerless
Punch” is a soap developed by me, Tom Peerless. Through countless hot
sunny Tampa Florida days spent on roofs I have learned and developed
what is
the absolute best cleaner to disinfect and stop the mold in its tracks.
In order to kill the plant growing on your roof
without
killing the plants below, we use the weakest effective ARMA approved
solution. This is obtained cleaning with large amounts of weaker
solutions instead of small strong straight chlorine solutions with
small gallon per minute pumps.
“That’s just strong bleach” is a common mistake most folks
assume. Have you ever heard horror stories of homeowners’ plants and
grass dying after a roof cleaning? That is what will happen if just
strong bleach is used. Not only is this dangerous to your plants it is
the wrong way to clean your roof according to ARMA (Asphalt Roofing
Manufacturers of America), which regulates asphalt shingle roof
specifications.
Not only do we follow these guidelines we take it a few steps
further, adding emulsifiers and gelling agents into our solution. A
simple question to ask a “so-called” “Tampa area non pressure roof
cleaner” to be
sure they are using an ARMA approved solution would be: What gallon per
minute and psi pumps do you use to deliver the ARMA approved solution?
A pressure washer alone can not deliver the suggested strength of soap
to “kill” the fungus. Therefore, these pressure washers must then use
“low pressure” to remove the loosened fungus off of your roof, removing
the heat absorbing granules with it.
Peerless Pressure Washing and Roof Cleaning utilize custom,
made to our specifications, roof cleaning pumps that do not even
resemble a pressure washer. These pumps are made to deliver the large
gallon per minute flow needed of Peerless Punch with minimal pressure
to your roof. |